forked from stm/stm32-mw-usb-device
Release v2.9.0
This commit is contained in:
slimih
219
Class/CCID/Inc/usbd_ccid_cmd.h
Normal file
219
Class/CCID/Inc/usbd_ccid_cmd.h
Normal file
@@ -0,0 +1,219 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file usbd_ccid_cmd.h
|
||||
* @author MCD Application Team
|
||||
* @brief header file for the usbd_ccid_cmd.c file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __USBD_CCID_CMD_H
|
||||
#define __USBD_CCID_CMD_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#ifndef __USBD_CCID_IF_H
|
||||
#include "usbd_ccid_if_template.h"
|
||||
#endif
|
||||
|
||||
#ifndef __USBD_CCID_SC_IF_H
|
||||
#include "usbd_ccid_sc_if_template.h"
|
||||
#endif
|
||||
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
|
||||
/******************************************************************************/
|
||||
/* ERROR CODES for USB Bulk In Messages : bError */
|
||||
/******************************************************************************/
|
||||
|
||||
#define SLOT_NO_ERROR 0x81U
|
||||
#define SLOTERROR_UNKNOWN 0x82U
|
||||
/*----------------------------------------------------------------------------*/
|
||||
|
||||
/* Index of not supported / incorrect message parameter : 7Fh to 01h */
|
||||
/* These Values are used for Return Types between Firmware Layers */
|
||||
/*
|
||||
Failure of a command
|
||||
The CCID cannot parse one parameter or the ICC is not supporting one parameter.
|
||||
Then the Slot Error register contains the index of the first bad parameter as a
|
||||
positive number (1-127). For instance, if the CCID receives an ICC command to
|
||||
an unimplemented slot, then the Slot Error register shall be set to 5 (index of bSlot field) */
|
||||
|
||||
/* Following Parameters used in PC_to_RDR_XfrBlock */
|
||||
#define SLOTERROR_BAD_LENTGH 0x01U
|
||||
#define SLOTERROR_BAD_SLOT 0x05U
|
||||
#define SLOTERROR_BAD_POWERSELECT 0x07U
|
||||
#define SLOTERROR_BAD_PROTOCOLNUM 0x07U
|
||||
#define SLOTERROR_BAD_CLOCKCOMMAND 0x07U
|
||||
#define SLOTERROR_BAD_ABRFU_3B 0x07U
|
||||
#define SLOTERROR_BAD_BMCHANGES 0x07U
|
||||
#define SLOTERROR_BAD_BFUNCTION_MECHANICAL 0x07U
|
||||
#define SLOTERROR_BAD_ABRFU_2B 0x08U
|
||||
#define SLOTERROR_BAD_LEVELPARAMETER 0x08U
|
||||
#define SLOTERROR_BAD_FIDI 0x0AU
|
||||
#define SLOTERROR_BAD_T01CONVCHECKSUM 0x0BU
|
||||
#define SLOTERROR_BAD_GUARDTIME 0x0CU
|
||||
#define SLOTERROR_BAD_WAITINGINTEGER 0x0DU
|
||||
#define SLOTERROR_BAD_CLOCKSTOP 0x0EU
|
||||
#define SLOTERROR_BAD_IFSC 0x0FU
|
||||
#define SLOTERROR_BAD_NAD 0x10U
|
||||
#define SLOTERROR_BAD_DWLENGTH 0x08U
|
||||
|
||||
|
||||
/*---------- Table 6.2-2 Slot error register when bmCommandStatus = 1 */
|
||||
#define SLOTERROR_CMD_ABORTED 0xFFU
|
||||
#define SLOTERROR_ICC_MUTE 0xFEU
|
||||
#define SLOTERROR_XFR_PARITY_ERROR 0xFDU
|
||||
#define SLOTERROR_XFR_OVERRUN 0xFCU
|
||||
#define SLOTERROR_HW_ERROR 0xFBU
|
||||
#define SLOTERROR_BAD_ATR_TS 0xF8U
|
||||
#define SLOTERROR_BAD_ATR_TCK 0xF7U
|
||||
#define SLOTERROR_ICC_PROTOCOL_NOT_SUPPORTED 0xF6U
|
||||
#define SLOTERROR_ICC_CLASS_NOT_SUPPORTED 0xF5U
|
||||
#define SLOTERROR_PROCEDURE_BYTE_CONFLICT 0xF4U
|
||||
#define SLOTERROR_DEACTIVATED_PROTOCOL 0xF3U
|
||||
#define SLOTERROR_BUSY_WITH_AUTO_SEQUENCE 0xF2U
|
||||
#define SLOTERROR_PIN_TIMEOUT 0xF0U
|
||||
#define SLOTERROR_PIN_CANCELLED 0xEFU
|
||||
#define SLOTERROR_CMD_SLOT_BUSY 0xE0U
|
||||
#define SLOTERROR_CMD_NOT_SUPPORTED 0x00U
|
||||
|
||||
/* Following Parameters used in PC_to_RDR_ResetParameters */
|
||||
/* DEFAULT_FIDI_VALUE */
|
||||
#ifndef DEFAULT_FIDI
|
||||
#define DEFAULT_FIDI 0x11U
|
||||
#endif
|
||||
#ifndef DEFAULT_T01CONVCHECKSUM
|
||||
#define DEFAULT_T01CONVCHECKSUM 0x00U
|
||||
#endif
|
||||
#ifndef DEFAULT_EXTRA_GUARDTIME
|
||||
#define DEFAULT_EXTRA_GUARDTIME 0x00U
|
||||
#endif
|
||||
#ifndef DEFAULT_WAITINGINTEGER
|
||||
#define DEFAULT_WAITINGINTEGER 0x0AU
|
||||
#endif
|
||||
#ifndef DEFAULT_CLOCKSTOP
|
||||
#define DEFAULT_CLOCKSTOP 0x00U
|
||||
#endif
|
||||
#ifndef DEFAULT_IFSC
|
||||
#define DEFAULT_IFSC 0x20U
|
||||
#endif
|
||||
#ifndef DEFAULT_NAD
|
||||
#define DEFAULT_NAD 0x00U
|
||||
#endif
|
||||
|
||||
/* Following Parameters used in PC_to_RDR_IccPowerOn */
|
||||
#define VOLTAGE_SELECTION_AUTOMATIC 0xFFU
|
||||
#define VOLTAGE_SELECTION_3V 0x02U
|
||||
#define VOLTAGE_SELECTION_5V 0x01U
|
||||
#define VOLTAGE_SELECTION_1V8 0x03U
|
||||
|
||||
/*
|
||||
Offset=0 bmICCStatus 2 bit 0, 1, 2
|
||||
0 - An ICC is present and active (power is on and stable, RST is inactive)
|
||||
1 - An ICC is present and inactive (not activated or shut down by hardware error)
|
||||
2 - No ICC is present
|
||||
3 - RFU
|
||||
Offset=0 bmRFU 4 bits 0 RFU
|
||||
Offset=6 bmCommandStatus 2 bits 0, 1, 2
|
||||
0 - Processed without error
|
||||
1 - Failed (error code provided by the error register)
|
||||
2 - Time Extension is requested
|
||||
3 - RFU
|
||||
*/
|
||||
|
||||
#define BM_ICC_PRESENT_ACTIVE 0x00U
|
||||
#define BM_ICC_PRESENT_INACTIVE 0x01U
|
||||
#define BM_ICC_NO_ICC_PRESENT 0x02U
|
||||
|
||||
#define BM_COMMAND_STATUS_OFFSET 0x06U
|
||||
#define BM_COMMAND_STATUS_NO_ERROR 0x00U
|
||||
#define BM_COMMAND_STATUS_FAILED (0x01U << BM_COMMAND_STATUS_OFFSET)
|
||||
#define BM_COMMAND_STATUS_TIME_EXTN (0x02 << BM_COMMAND_STATUS_OFFSET)
|
||||
|
||||
|
||||
#if (ATR_T01 == 0)
|
||||
#define SIZE_OF_ATR 19U
|
||||
#else
|
||||
#define SIZE_OF_ATR 15U
|
||||
#endif
|
||||
|
||||
/* defines for the CCID_CMD Layers */
|
||||
#define LEN_RDR_TO_PC_SLOTSTATUS 10U
|
||||
#define LEN_PROTOCOL_STRUCT_T0 5U
|
||||
#define LEN_PROTOCOL_STRUCT_T1 7U
|
||||
|
||||
#define BPROTOCOL_NUM_T0 0U
|
||||
#define BPROTOCOL_NUM_T1 1U
|
||||
|
||||
/************************************************************************************/
|
||||
/* ERROR CODES for RDR_TO_PC_HARDWAREERROR Message : bHardwareErrorCode */
|
||||
/************************************************************************************/
|
||||
|
||||
#define HARDWAREERRORCODE_OVERCURRENT 0x01U
|
||||
#define HARDWAREERRORCODE_VOLTAGEERROR 0x02U
|
||||
#define HARDWAREERRORCODE_OVERCURRENT_IT 0x04U
|
||||
#define HARDWAREERRORCODE_VOLTAGEERROR_IT 0x08U
|
||||
|
||||
|
||||
|
||||
#define CHK_PARAM_SLOT 0x01U
|
||||
#define CHK_PARAM_DWLENGTH 0x02U
|
||||
#define CHK_PARAM_abRFU2 0x04U
|
||||
#define CHK_PARAM_abRFU3 0x08U
|
||||
#define CHK_PARAM_CARD_PRESENT 0x10U
|
||||
#define CHK_PARAM_ABORT 0x20U
|
||||
#define CHK_ACTIVE_STATE 0x40U
|
||||
|
||||
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
uint8_t PC_to_RDR_IccPowerOn(USBD_HandleTypeDef *pdev);
|
||||
uint8_t PC_to_RDR_IccPowerOff(USBD_HandleTypeDef *pdev);
|
||||
uint8_t PC_to_RDR_GetSlotStatus(USBD_HandleTypeDef *pdev);
|
||||
uint8_t PC_to_RDR_XfrBlock(USBD_HandleTypeDef *pdev);
|
||||
uint8_t PC_to_RDR_GetParameters(USBD_HandleTypeDef *pdev);
|
||||
uint8_t PC_to_RDR_ResetParameters(USBD_HandleTypeDef *pdev);
|
||||
uint8_t PC_to_RDR_SetParameters(USBD_HandleTypeDef *pdev);
|
||||
uint8_t PC_to_RDR_Escape(USBD_HandleTypeDef *pdev);
|
||||
uint8_t PC_to_RDR_IccClock(USBD_HandleTypeDef *pdev);
|
||||
uint8_t PC_to_RDR_Abort(USBD_HandleTypeDef *pdev);
|
||||
uint8_t PC_TO_RDR_T0Apdu(USBD_HandleTypeDef *pdev);
|
||||
uint8_t PC_TO_RDR_Mechanical(USBD_HandleTypeDef *pdev);
|
||||
uint8_t PC_TO_RDR_SetDataRateAndClockFrequency(USBD_HandleTypeDef *pdev);
|
||||
uint8_t PC_TO_RDR_Secure(USBD_HandleTypeDef *pdev);
|
||||
|
||||
void RDR_to_PC_DataBlock(uint8_t errorCode, USBD_HandleTypeDef *pdev);
|
||||
void RDR_to_PC_NotifySlotChange(USBD_HandleTypeDef *pdev);
|
||||
void RDR_to_PC_SlotStatus(uint8_t errorCode, USBD_HandleTypeDef *pdev);
|
||||
void RDR_to_PC_Parameters(uint8_t errorCode, USBD_HandleTypeDef *pdev);
|
||||
void RDR_to_PC_Escape(uint8_t errorCode, USBD_HandleTypeDef *pdev);
|
||||
void RDR_to_PC_DataRateAndClockFrequency(uint8_t errorCode, USBD_HandleTypeDef *pdev);
|
||||
|
||||
void CCID_UpdSlotStatus(USBD_HandleTypeDef *pdev, uint8_t slotStatus);
|
||||
void CCID_UpdSlotChange(USBD_HandleTypeDef *pdev, uint8_t changeStatus);
|
||||
uint8_t CCID_IsSlotStatusChange(USBD_HandleTypeDef *pdev);
|
||||
uint8_t CCID_CmdAbort(uint8_t slot, uint8_t seq);
|
||||
uint8_t USBD_CCID_Transfer_Data_Request(USBD_HandleTypeDef *pdev,
|
||||
uint8_t *dataPointer, uint16_t dataLen);
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __USBD_CCID_CMD_H */
|
||||
Reference in New Issue
Block a user