© Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * http://www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_CORE_H
+#define __USBD_CORE_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+#include "usbd_def.h"
+#include "usbd_ioreq.h"
+#include "usbd_ctlreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_CORE
+ * @brief This file is the Header file for usbd_core.c file
+ * @{
+ */
+
+
+/** @defgroup USBD_CORE_Exported_Defines
+ * @{
+ */
+#ifndef USBD_DEBUG_LEVEL
+#define USBD_DEBUG_LEVEL 0U
+#endif /* USBD_DEBUG_LEVEL */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_CORE_Exported_TypesDefinitions
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_CORE_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_Variables
+ * @{
+ */
+#define USBD_SOF USBD_LL_SOF
+/**
+ * @}
+ */
+
+/** @defgroup USBD_CORE_Exported_FunctionsPrototype
+ * @{
+ */
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id);
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass);
+
+USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx);
+
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup);
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev , uint8_t epnum, uint8_t *pdata);
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed);
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum);
+
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev);
+
+/* USBD Low Level Driver */
+USBD_StatusTypeDef USBD_LL_Init (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_DeInit (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_Stop (USBD_HandleTypeDef *pdev);
+USBD_StatusTypeDef USBD_LL_OpenEP (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t ep_type,
+ uint16_t ep_mps);
+
+USBD_StatusTypeDef USBD_LL_CloseEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_FlushEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_StallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_ClearStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+uint8_t USBD_LL_IsStallEP (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+USBD_StatusTypeDef USBD_LL_SetUSBAddress (USBD_HandleTypeDef *pdev, uint8_t dev_addr);
+USBD_StatusTypeDef USBD_LL_Transmit (USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size);
+
+uint32_t USBD_LL_GetRxDataSize (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+void USBD_LL_Delay (uint32_t Delay);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_CORE_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
+
diff --git a/Core/Inc/usbd_ctlreq.h b/Core/Inc/usbd_ctlreq.h
new file mode 100644
index 0000000..8aa65ca
--- /dev/null
+++ b/Core/Inc/usbd_ctlreq.h
@@ -0,0 +1,105 @@
+/**
+ ******************************************************************************
+ * @file usbd_req.h
+ * @author MCD Application Team
+ * @brief Header file for the usbd_req.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * http://www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USB_REQUEST_H
+#define __USB_REQUEST_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_REQ
+ * @brief header file for the usbd_req.c file
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Exported_Types
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_REQ_Exported_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+/** @defgroup USBD_REQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+
+void USBD_CtlError (USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req);
+
+void USBD_ParseSetupRequest (USBD_SetupReqTypedef *req, uint8_t *pdata);
+
+void USBD_GetString (uint8_t *desc, uint8_t *unicode, uint16_t *len);
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USB_REQUEST_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Core/Inc/usbd_def.h b/Core/Inc/usbd_def.h
new file mode 100644
index 0000000..c210c1f
--- /dev/null
+++ b/Core/Inc/usbd_def.h
@@ -0,0 +1,342 @@
+/**
+ ******************************************************************************
+ * @file usbd_def.h
+ * @author MCD Application Team
+ * @brief General defines for the usb device library
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * http://www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DEF_H
+#define __USBD_DEF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_conf.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USB_DEF
+ * @brief general defines for the usb device library file
+ * @{
+ */
+
+/** @defgroup USB_DEF_Exported_Defines
+ * @{
+ */
+
+#ifndef NULL
+#define NULL 0U
+#endif /* NULL */
+
+#ifndef USBD_MAX_NUM_INTERFACES
+#define USBD_MAX_NUM_INTERFACES 1U
+#endif /* USBD_MAX_NUM_CONFIGURATION */
+
+#ifndef USBD_MAX_NUM_CONFIGURATION
+#define USBD_MAX_NUM_CONFIGURATION 1U
+#endif /* USBD_MAX_NUM_CONFIGURATION */
+
+#ifndef USBD_LPM_ENABLED
+#define USBD_LPM_ENABLED 0U
+#endif /* USBD_LPM_ENABLED */
+
+#ifndef USBD_SELF_POWERED
+#define USBD_SELF_POWERED 1U
+#endif /*USBD_SELF_POWERED */
+
+#ifndef USBD_SUPPORT_USER_STRING
+#define USBD_SUPPORT_USER_STRING 0U
+#endif /* USBD_SUPPORT_USER_STRING */
+
+#define USB_LEN_DEV_QUALIFIER_DESC 0x0AU
+#define USB_LEN_DEV_DESC 0x12U
+#define USB_LEN_CFG_DESC 0x09U
+#define USB_LEN_IF_DESC 0x09U
+#define USB_LEN_EP_DESC 0x07U
+#define USB_LEN_OTG_DESC 0x03U
+#define USB_LEN_LANGID_STR_DESC 0x04U
+#define USB_LEN_OTHER_SPEED_DESC_SIZ 0x09U
+
+#define USBD_IDX_LANGID_STR 0x00U
+#define USBD_IDX_MFC_STR 0x01U
+#define USBD_IDX_PRODUCT_STR 0x02U
+#define USBD_IDX_SERIAL_STR 0x03U
+#define USBD_IDX_CONFIG_STR 0x04U
+#define USBD_IDX_INTERFACE_STR 0x05U
+
+#define USB_REQ_TYPE_STANDARD 0x00U
+#define USB_REQ_TYPE_CLASS 0x20U
+#define USB_REQ_TYPE_VENDOR 0x40U
+#define USB_REQ_TYPE_MASK 0x60U
+
+#define USB_REQ_RECIPIENT_DEVICE 0x00U
+#define USB_REQ_RECIPIENT_INTERFACE 0x01U
+#define USB_REQ_RECIPIENT_ENDPOINT 0x02U
+#define USB_REQ_RECIPIENT_MASK 0x03U
+
+#define USB_REQ_GET_STATUS 0x00U
+#define USB_REQ_CLEAR_FEATURE 0x01U
+#define USB_REQ_SET_FEATURE 0x03U
+#define USB_REQ_SET_ADDRESS 0x05U
+#define USB_REQ_GET_DESCRIPTOR 0x06U
+#define USB_REQ_SET_DESCRIPTOR 0x07U
+#define USB_REQ_GET_CONFIGURATION 0x08U
+#define USB_REQ_SET_CONFIGURATION 0x09U
+#define USB_REQ_GET_INTERFACE 0x0AU
+#define USB_REQ_SET_INTERFACE 0x0BU
+#define USB_REQ_SYNCH_FRAME 0x0CU
+
+#define USB_DESC_TYPE_DEVICE 0x01U
+#define USB_DESC_TYPE_CONFIGURATION 0x02U
+#define USB_DESC_TYPE_STRING 0x03U
+#define USB_DESC_TYPE_INTERFACE 0x04U
+#define USB_DESC_TYPE_ENDPOINT 0x05U
+#define USB_DESC_TYPE_DEVICE_QUALIFIER 0x06U
+#define USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION 0x07U
+#define USB_DESC_TYPE_BOS 0x0FU
+
+#define USB_CONFIG_REMOTE_WAKEUP 0x02U
+#define USB_CONFIG_SELF_POWERED 0x01U
+
+#define USB_FEATURE_EP_HALT 0x00U
+#define USB_FEATURE_REMOTE_WAKEUP 0x01U
+#define USB_FEATURE_TEST_MODE 0x02U
+
+#define USB_DEVICE_CAPABITY_TYPE 0x10U
+
+#define USB_HS_MAX_PACKET_SIZE 512U
+#define USB_FS_MAX_PACKET_SIZE 64U
+#define USB_MAX_EP0_SIZE 64U
+
+/* Device Status */
+#define USBD_STATE_DEFAULT 0x01U
+#define USBD_STATE_ADDRESSED 0x02U
+#define USBD_STATE_CONFIGURED 0x03U
+#define USBD_STATE_SUSPENDED 0x04U
+
+
+/* EP0 State */
+#define USBD_EP0_IDLE 0x00U
+#define USBD_EP0_SETUP 0x01U
+#define USBD_EP0_DATA_IN 0x02U
+#define USBD_EP0_DATA_OUT 0x03U
+#define USBD_EP0_STATUS_IN 0x04U
+#define USBD_EP0_STATUS_OUT 0x05U
+#define USBD_EP0_STALL 0x06U
+
+#define USBD_EP_TYPE_CTRL 0x00U
+#define USBD_EP_TYPE_ISOC 0x01U
+#define USBD_EP_TYPE_BULK 0x02U
+#define USBD_EP_TYPE_INTR 0x03U
+
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_DEF_Exported_TypesDefinitions
+ * @{
+ */
+
+typedef struct usb_setup_req
+{
+
+ uint8_t bmRequest;
+ uint8_t bRequest;
+ uint16_t wValue;
+ uint16_t wIndex;
+ uint16_t wLength;
+}USBD_SetupReqTypedef;
+
+struct _USBD_HandleTypeDef;
+
+typedef struct _Device_cb
+{
+ uint8_t (*Init) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+ uint8_t (*DeInit) (struct _USBD_HandleTypeDef *pdev , uint8_t cfgidx);
+ /* Control Endpoints*/
+ uint8_t (*Setup) (struct _USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req);
+ uint8_t (*EP0_TxSent) (struct _USBD_HandleTypeDef *pdev );
+ uint8_t (*EP0_RxReady) (struct _USBD_HandleTypeDef *pdev );
+ /* Class Specific Endpoints*/
+ uint8_t (*DataIn) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*DataOut) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*SOF) (struct _USBD_HandleTypeDef *pdev);
+ uint8_t (*IsoINIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+ uint8_t (*IsoOUTIncomplete) (struct _USBD_HandleTypeDef *pdev , uint8_t epnum);
+
+ uint8_t *(*GetHSConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetFSConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetOtherSpeedConfigDescriptor)(uint16_t *length);
+ uint8_t *(*GetDeviceQualifierDescriptor)(uint16_t *length);
+#if (USBD_SUPPORT_USER_STRING == 1U)
+ uint8_t *(*GetUsrStrDescriptor)(struct _USBD_HandleTypeDef *pdev ,uint8_t index, uint16_t *length);
+#endif
+
+} USBD_ClassTypeDef;
+
+/* Following USB Device Speed */
+typedef enum
+{
+ USBD_SPEED_HIGH = 0U,
+ USBD_SPEED_FULL = 1U,
+ USBD_SPEED_LOW = 2U,
+}USBD_SpeedTypeDef;
+
+/* Following USB Device status */
+typedef enum {
+ USBD_OK = 0U,
+ USBD_BUSY,
+ USBD_FAIL,
+}USBD_StatusTypeDef;
+
+/* USB Device descriptors structure */
+typedef struct
+{
+ uint8_t *(*GetDeviceDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetLangIDStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetManufacturerStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetProductStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetSerialStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetConfigurationStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+ uint8_t *(*GetInterfaceStrDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+#if (USBD_LPM_ENABLED == 1U)
+ uint8_t *(*GetBOSDescriptor)( USBD_SpeedTypeDef speed , uint16_t *length);
+#endif
+} USBD_DescriptorsTypeDef;
+
+/* USB Device handle structure */
+typedef struct
+{
+ uint32_t status;
+ uint32_t is_used;
+ uint32_t total_length;
+ uint32_t rem_length;
+ uint32_t maxpacket;
+} USBD_EndpointTypeDef;
+
+/* USB Device handle structure */
+typedef struct _USBD_HandleTypeDef
+{
+ uint8_t id;
+ uint32_t dev_config;
+ uint32_t dev_default_config;
+ uint32_t dev_config_status;
+ USBD_SpeedTypeDef dev_speed;
+ USBD_EndpointTypeDef ep_in[15];
+ USBD_EndpointTypeDef ep_out[15];
+ uint32_t ep0_state;
+ uint32_t ep0_data_len;
+ uint8_t dev_state;
+ uint8_t dev_old_state;
+ uint8_t dev_address;
+ uint8_t dev_connection_status;
+ uint8_t dev_test_mode;
+ uint32_t dev_remote_wakeup;
+
+ USBD_SetupReqTypedef request;
+ USBD_DescriptorsTypeDef *pDesc;
+ USBD_ClassTypeDef *pClass;
+ void *pClassData;
+ void *pUserData;
+ void *pData;
+} USBD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_DEF_Exported_Macros
+ * @{
+ */
+#define SWAPBYTE(addr) (((uint16_t)(*((uint8_t *)(addr)))) + \
+ (((uint16_t)(*(((uint8_t *)(addr)) + 1U))) << 8U))
+
+#define LOBYTE(x) ((uint8_t)(x & 0x00FFU))
+#define HIBYTE(x) ((uint8_t)((x & 0xFF00U) >> 8U))
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+#define MAX(a, b) (((a) > (b)) ? (a) : (b))
+
+
+#if defined ( __GNUC__ )
+ #ifndef __weak
+ #define __weak __attribute__((weak))
+ #endif /* __weak */
+ #ifndef __packed
+ #define __packed __attribute__((__packed__))
+ #endif /* __packed */
+#endif /* __GNUC__ */
+
+
+/* In HS mode and when the DMA is used, all variables and data structures dealing
+ with the DMA during the transaction process should be 4-bytes aligned */
+
+#if defined (__GNUC__) /* GNU Compiler */
+ #define __ALIGN_END __attribute__ ((aligned (4)))
+ #define __ALIGN_BEGIN
+#else
+ #define __ALIGN_END
+ #if defined (__CC_ARM) /* ARM Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #elif defined (__ICCARM__) /* IAR Compiler */
+ #define __ALIGN_BEGIN
+ #elif defined (__TASKING__) /* TASKING Compiler */
+ #define __ALIGN_BEGIN __align(4)
+ #endif /* __CC_ARM */
+#endif /* __GNUC__ */
+
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_DEF_Exported_FunctionsPrototype
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_DEF_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Core/Inc/usbd_desc_template.h b/Core/Inc/usbd_desc_template.h
new file mode 100644
index 0000000..0bb87fc
--- /dev/null
+++ b/Core/Inc/usbd_desc_template.h
@@ -0,0 +1,41 @@
+/**
+ ******************************************************************************
+ * @file usbd_desc_template.h
+ * @author MCD Application Team
+ * @brief Header for usbd_desc_template.c module
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * http://www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_DESC_TEMPLATE_H
+#define __USBD_DESC_TEMPLATE_H
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+#define DEVICE_ID1 (0x1FFF7A10)
+#define DEVICE_ID2 (0x1FFF7A14)
+#define DEVICE_ID3 (0x1FFF7A18)
+
+#define USB_SIZ_STRING_SERIAL 0x1A
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+extern USBD_DescriptorsTypeDef XXX_Desc; /* Replace 'XXX_Desc' with your active USB device class, ex: HID_Desc */
+
+#endif /* __USBD_DESC_TEMPLATE_H*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Core/Inc/usbd_ioreq.h b/Core/Inc/usbd_ioreq.h
new file mode 100644
index 0000000..96e165c
--- /dev/null
+++ b/Core/Inc/usbd_ioreq.h
@@ -0,0 +1,119 @@
+/**
+ ******************************************************************************
+ * @file usbd_ioreq.h
+ * @author MCD Application Team
+ * @brief Header file for the usbd_ioreq.c file
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * http://www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __USBD_IOREQ_H
+#define __USBD_IOREQ_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_def.h"
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ
+ * @brief header file for the usbd_ioreq.c file
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Defines
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Exported_Types
+ * @{
+ */
+
+
+/**
+ * @}
+ */
+
+
+
+/** @defgroup USBD_IOREQ_Exported_Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/** @defgroup USBD_IOREQ_Exported_FunctionsPrototype
+ * @{
+ */
+
+USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf,
+ uint16_t len);
+
+USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev);
+
+USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev);
+
+uint32_t USBD_GetRxCount (USBD_HandleTypeDef *pdev, uint8_t ep_addr);
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __USBD_IOREQ_H */
+
+/**
+ * @}
+ */
+
+/**
+* @}
+*/
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Core/Src/usbd_conf_template.c b/Core/Src/usbd_conf_template.c
new file mode 100644
index 0000000..2d6d257
--- /dev/null
+++ b/Core/Src/usbd_conf_template.c
@@ -0,0 +1,204 @@
+/**
+ ******************************************************************************
+ * @file usbd_conf_template.c
+ * @author MCD Application Team
+ * @brief USB Device configuration and interface file
+ * This template should be copied to the user folder, renamed and customized
+ * following user needs.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * http://www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+/**
+ * @brief Initializes the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Init(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief De-Initializes the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_DeInit(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Starts the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Start(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Stops the Low Level portion of the Device driver.
+ * @param pdev: Device handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Stop(USBD_HandleTypeDef *pdev)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Opens an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param ep_type: Endpoint Type
+ * @param ep_mps: Endpoint Max Packet Size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_OpenEP(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t ep_type,
+ uint16_t ep_mps)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Closes an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_CloseEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Flushes an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_FlushEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Sets a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_StallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Clears a Stall condition on an endpoint of the Low Level Driver.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_ClearStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Returns Stall condition.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval Stall (1: Yes, 0: No)
+ */
+uint8_t USBD_LL_IsStallEP(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return 0;
+}
+
+/**
+ * @brief Assigns a USB address to the device.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_SetUSBAddress(USBD_HandleTypeDef *pdev, uint8_t dev_addr)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Transmits data over an endpoint.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param pbuf: Pointer to data to be sent
+ * @param size: Data size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_Transmit(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Prepares an endpoint for reception.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @param pbuf: Pointer to data to be received
+ * @param size: Data size
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_LL_PrepareReceive(USBD_HandleTypeDef *pdev,
+ uint8_t ep_addr,
+ uint8_t *pbuf,
+ uint16_t size)
+{
+ return USBD_OK;
+}
+
+/**
+ * @brief Returns the last transferred packet size.
+ * @param pdev: Device handle
+ * @param ep_addr: Endpoint Number
+ * @retval Recived Data Size
+ */
+uint32_t USBD_LL_GetRxDataSize(USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return 0;
+}
+
+/**
+ * @brief Delays routine for the USB Device Library.
+ * @param Delay: Delay in ms
+ * @retval None
+ */
+void USBD_LL_Delay(uint32_t Delay)
+{
+}
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Core/Src/usbd_core.c b/Core/Src/usbd_core.c
new file mode 100644
index 0000000..89cb831
--- /dev/null
+++ b/Core/Src/usbd_core.c
@@ -0,0 +1,598 @@
+/**
+ ******************************************************************************
+ * @file usbd_core.c
+ * @author MCD Application Team
+ * @brief This file provides all the USBD core functions.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * http://www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+
+/** @addtogroup STM32_USBD_DEVICE_LIBRARY
+* @{
+*/
+
+
+/** @defgroup USBD_CORE
+* @brief usbd core module
+* @{
+*/
+
+/** @defgroup USBD_CORE_Private_TypesDefinitions
+* @{
+*/
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Defines
+* @{
+*/
+
+/**
+* @}
+*/
+
+
+/** @defgroup USBD_CORE_Private_Macros
+* @{
+*/
+/**
+* @}
+*/
+
+
+
+
+/** @defgroup USBD_CORE_Private_FunctionPrototypes
+* @{
+*/
+
+/**
+* @}
+*/
+
+/** @defgroup USBD_CORE_Private_Variables
+* @{
+*/
+
+/**
+* @}
+*/
+
+/** @defgroup USBD_CORE_Private_Functions
+* @{
+*/
+
+/**
+* @brief USBD_Init
+* Initializes the device stack and load the class driver
+* @param pdev: device instance
+* @param pdesc: Descriptor structure address
+* @param id: Low level core index
+* @retval None
+*/
+USBD_StatusTypeDef USBD_Init(USBD_HandleTypeDef *pdev, USBD_DescriptorsTypeDef *pdesc, uint8_t id)
+{
+ /* Check whether the USB Host handle is valid */
+ if(pdev == NULL)
+ {
+#if (USBD_DEBUG_LEVEL > 1U)
+ USBD_ErrLog("Invalid Device handle");
+#endif
+ return USBD_FAIL;
+ }
+
+ /* Unlink previous class*/
+ if(pdev->pClass != NULL)
+ {
+ pdev->pClass = NULL;
+ }
+
+ /* Assign USBD Descriptors */
+ if(pdesc != NULL)
+ {
+ pdev->pDesc = pdesc;
+ }
+
+ /* Set Device initial State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->id = id;
+ /* Initialize low level driver */
+ USBD_LL_Init(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DeInit
+* Re-Initialize th device library
+* @param pdev: device instance
+* @retval status: status
+*/
+USBD_StatusTypeDef USBD_DeInit(USBD_HandleTypeDef *pdev)
+{
+ /* Set Default State */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ /* Initialize low level driver */
+ USBD_LL_DeInit(pdev);
+
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_RegisterClass
+ * Link class driver to Device Core.
+ * @param pDevice : Device Handle
+ * @param pclass: Class handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_RegisterClass(USBD_HandleTypeDef *pdev, USBD_ClassTypeDef *pclass)
+{
+ USBD_StatusTypeDef status = USBD_OK;
+ if(pclass != 0)
+ {
+ /* link the class to the USB Device handle */
+ pdev->pClass = pclass;
+ status = USBD_OK;
+ }
+ else
+ {
+#if (USBD_DEBUG_LEVEL > 1U)
+ USBD_ErrLog("Invalid Class handle");
+#endif
+ status = USBD_FAIL;
+ }
+
+ return status;
+}
+
+/**
+ * @brief USBD_Start
+ * Start the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Start (USBD_HandleTypeDef *pdev)
+{
+
+ /* Start the low level driver */
+ USBD_LL_Start(pdev);
+
+ return USBD_OK;
+}
+
+/**
+ * @brief USBD_Stop
+ * Stop the USB Device Core.
+ * @param pdev: Device Handle
+ * @retval USBD Status
+ */
+USBD_StatusTypeDef USBD_Stop (USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config);
+
+ /* Stop the low level driver */
+ USBD_LL_Stop(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_RunTestMode
+* Launch test mode process
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_RunTestMode (USBD_HandleTypeDef *pdev)
+{
+ /* Prevent unused argument compilation warning */
+ UNUSED(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_SetClassConfig
+* Configure device and start the interface
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_SetClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ USBD_StatusTypeDef ret = USBD_FAIL;
+
+ if(pdev->pClass != NULL)
+ {
+ /* Set configuration and Start the Class*/
+ if(pdev->pClass->Init(pdev, cfgidx) == 0U)
+ {
+ ret = USBD_OK;
+ }
+ }
+
+ return ret;
+}
+
+/**
+* @brief USBD_ClrClassConfig
+* Clear current configuration
+* @param pdev: device instance
+* @param cfgidx: configuration index
+* @retval status: USBD_StatusTypeDef
+*/
+USBD_StatusTypeDef USBD_ClrClassConfig(USBD_HandleTypeDef *pdev, uint8_t cfgidx)
+{
+ /* Clear configuration and De-initialize the Class process*/
+ pdev->pClass->DeInit(pdev, cfgidx);
+ return USBD_OK;
+}
+
+
+/**
+* @brief USBD_SetupStage
+* Handle the setup stage
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetupStage(USBD_HandleTypeDef *pdev, uint8_t *psetup)
+{
+ USBD_ParseSetupRequest(&pdev->request, psetup);
+
+ pdev->ep0_state = USBD_EP0_SETUP;
+
+ pdev->ep0_data_len = pdev->request.wLength;
+
+ switch (pdev->request.bmRequest & 0x1FU)
+ {
+ case USB_REQ_RECIPIENT_DEVICE:
+ USBD_StdDevReq (pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_INTERFACE:
+ USBD_StdItfReq(pdev, &pdev->request);
+ break;
+
+ case USB_REQ_RECIPIENT_ENDPOINT:
+ USBD_StdEPReq(pdev, &pdev->request);
+ break;
+
+ default:
+ USBD_LL_StallEP(pdev, (pdev->request.bmRequest & 0x80U));
+ break;
+ }
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataOutStage
+* Handle data OUT stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataOutStage(USBD_HandleTypeDef *pdev,
+ uint8_t epnum, uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if(epnum == 0U)
+ {
+ pep = &pdev->ep_out[0];
+
+ if ( pdev->ep0_state == USBD_EP0_DATA_OUT)
+ {
+ if(pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueRx (pdev,
+ pdata,
+ (uint16_t)MIN(pep->rem_length, pep->maxpacket));
+ }
+ else
+ {
+ if((pdev->pClass->EP0_RxReady != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_RxReady(pdev);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ else
+ {
+ if (pdev->ep0_state == USBD_EP0_STATUS_OUT)
+ {
+ /*
+ * STATUS PHASE completed, update ep0_state to idle
+ */
+ pdev->ep0_state = USBD_EP0_IDLE;
+ USBD_LL_StallEP(pdev, 0U);
+ }
+ }
+ }
+ else if((pdev->pClass->DataOut != NULL) &&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataOut(pdev, epnum);
+ }
+ else
+ {
+ /* should never be in this condition */
+ return USBD_FAIL;
+ }
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DataInStage
+* Handle data in stage
+* @param pdev: device instance
+* @param epnum: endpoint index
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DataInStage(USBD_HandleTypeDef *pdev, uint8_t epnum,
+ uint8_t *pdata)
+{
+ USBD_EndpointTypeDef *pep;
+
+ if(epnum == 0U)
+ {
+ pep = &pdev->ep_in[0];
+
+ if ( pdev->ep0_state == USBD_EP0_DATA_IN)
+ {
+ if(pep->rem_length > pep->maxpacket)
+ {
+ pep->rem_length -= pep->maxpacket;
+
+ USBD_CtlContinueSendData (pdev, pdata, (uint16_t)pep->rem_length);
+
+ /* Prepare endpoint for premature end of transfer */
+ USBD_LL_PrepareReceive (pdev, 0U, NULL, 0U);
+ }
+ else
+ { /* last packet is MPS multiple, so send ZLP packet */
+ if((pep->total_length % pep->maxpacket == 0U) &&
+ (pep->total_length >= pep->maxpacket) &&
+ (pep->total_length < pdev->ep0_data_len))
+ {
+ USBD_CtlContinueSendData(pdev, NULL, 0U);
+ pdev->ep0_data_len = 0U;
+
+ /* Prepare endpoint for premature end of transfer */
+ USBD_LL_PrepareReceive (pdev, 0U, NULL, 0U);
+ }
+ else
+ {
+ if((pdev->pClass->EP0_TxSent != NULL)&&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->EP0_TxSent(pdev);
+ }
+ USBD_LL_StallEP(pdev, 0x80U);
+ USBD_CtlReceiveStatus(pdev);
+ }
+ }
+ }
+ else
+ {
+ if ((pdev->ep0_state == USBD_EP0_STATUS_IN) ||
+ (pdev->ep0_state == USBD_EP0_IDLE))
+ {
+ USBD_LL_StallEP(pdev, 0x80U);
+ }
+ }
+
+ if (pdev->dev_test_mode == 1U)
+ {
+ USBD_RunTestMode(pdev);
+ pdev->dev_test_mode = 0U;
+ }
+ }
+ else if((pdev->pClass->DataIn != NULL) &&
+ (pdev->dev_state == USBD_STATE_CONFIGURED))
+ {
+ pdev->pClass->DataIn(pdev, epnum);
+ }
+ else
+ {
+ /* should never be in this condition */
+ return USBD_FAIL;
+ }
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Reset(USBD_HandleTypeDef *pdev)
+{
+ /* Open EP0 OUT */
+ USBD_LL_OpenEP(pdev, 0x00U, USBD_EP_TYPE_CTRL, USB_MAX_EP0_SIZE);
+ pdev->ep_out[0x00U & 0xFU].is_used = 1U;
+
+ pdev->ep_out[0].maxpacket = USB_MAX_EP0_SIZE;
+
+ /* Open EP0 IN */
+ USBD_LL_OpenEP(pdev, 0x80U, USBD_EP_TYPE_CTRL, USB_MAX_EP0_SIZE);
+ pdev->ep_in[0x80U & 0xFU].is_used = 1U;
+
+ pdev->ep_in[0].maxpacket = USB_MAX_EP0_SIZE;
+ /* Upon Reset call user call back */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->ep0_state = USBD_EP0_IDLE;
+ pdev->dev_config= 0U;
+ pdev->dev_remote_wakeup = 0U;
+
+ if (pdev->pClassData)
+ {
+ pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config);
+ }
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_LL_Reset
+* Handle Reset event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_SetSpeed(USBD_HandleTypeDef *pdev, USBD_SpeedTypeDef speed)
+{
+ pdev->dev_speed = speed;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Suspend
+* Handle Suspend event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Suspend(USBD_HandleTypeDef *pdev)
+{
+ pdev->dev_old_state = pdev->dev_state;
+ pdev->dev_state = USBD_STATE_SUSPENDED;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_Resume
+* Handle Resume event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_Resume(USBD_HandleTypeDef *pdev)
+{
+ pdev->dev_state = pdev->dev_old_state;
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_SOF
+* Handle SOF event
+* @param pdev: device instance
+* @retval status
+*/
+
+USBD_StatusTypeDef USBD_LL_SOF(USBD_HandleTypeDef *pdev)
+{
+ if(pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ if(pdev->pClass->SOF != NULL)
+ {
+ pdev->pClass->SOF(pdev);
+ }
+ }
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoINIncomplete
+* Handle iso in incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoINIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ /* Prevent unused arguments compilation warning */
+ UNUSED(pdev);
+ UNUSED(epnum);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_IsoOUTIncomplete
+* Handle iso out incomplete event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_IsoOUTIncomplete(USBD_HandleTypeDef *pdev, uint8_t epnum)
+{
+ /* Prevent unused arguments compilation warning */
+ UNUSED(pdev);
+ UNUSED(epnum);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevConnected
+* Handle device connection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevConnected(USBD_HandleTypeDef *pdev)
+{
+ /* Prevent unused argument compilation warning */
+ UNUSED(pdev);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_DevDisconnected
+* Handle device disconnection event
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_LL_DevDisconnected(USBD_HandleTypeDef *pdev)
+{
+ /* Free Class Resources */
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ pdev->pClass->DeInit(pdev, (uint8_t)pdev->dev_config);
+
+ return USBD_OK;
+}
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+
+/**
+* @}
+*/
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
diff --git a/Core/Src/usbd_ctlreq.c b/Core/Src/usbd_ctlreq.c
new file mode 100644
index 0000000..9b64b5f
--- /dev/null
+++ b/Core/Src/usbd_ctlreq.c
@@ -0,0 +1,848 @@
+/**
+ ******************************************************************************
+ * @file usbd_req.c
+ * @author MCD Application Team
+ * @brief This file provides the standard USB requests following chapter 9.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * http://www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ctlreq.h"
+#include "usbd_ioreq.h"
+
+
+/** @addtogroup STM32_USBD_STATE_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_REQ
+ * @brief USB standard requests module
+ * @{
+ */
+
+/** @defgroup USBD_REQ_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Variables
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_FunctionPrototypes
+ * @{
+ */
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req);
+
+static uint8_t USBD_GetLen(uint8_t *buf);
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_REQ_Private_Functions
+ * @{
+ */
+
+
+/**
+* @brief USBD_StdDevReq
+* Handle standard usb device requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdDevReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (req->bmRequest & USB_REQ_TYPE_MASK)
+ {
+ case USB_REQ_TYPE_CLASS:
+ case USB_REQ_TYPE_VENDOR:
+ pdev->pClass->Setup(pdev, req);
+ break;
+
+ case USB_REQ_TYPE_STANDARD:
+
+ switch (req->bRequest)
+ {
+ case USB_REQ_GET_DESCRIPTOR:
+
+ USBD_GetDescriptor (pdev, req);
+ break;
+
+ case USB_REQ_SET_ADDRESS:
+ USBD_SetAddress (pdev, req);
+ break;
+
+ case USB_REQ_SET_CONFIGURATION:
+ USBD_SetConfig (pdev, req);
+ break;
+
+ case USB_REQ_GET_CONFIGURATION:
+ USBD_GetConfig (pdev, req);
+ break;
+
+ case USB_REQ_GET_STATUS:
+ USBD_GetStatus (pdev, req);
+ break;
+
+
+ case USB_REQ_SET_FEATURE:
+ USBD_SetFeature (pdev, req);
+ break;
+
+ case USB_REQ_CLEAR_FEATURE:
+ USBD_ClrFeature (pdev, req);
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+
+ return ret;
+}
+
+/**
+* @brief USBD_StdItfReq
+* Handle standard usb interface requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdItfReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+ USBD_StatusTypeDef ret = USBD_OK;
+
+ switch (req->bmRequest & USB_REQ_TYPE_MASK)
+ {
+ case USB_REQ_TYPE_CLASS:
+ case USB_REQ_TYPE_VENDOR:
+ case USB_REQ_TYPE_STANDARD:
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_DEFAULT:
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+
+ if (LOBYTE(req->wIndex) <= USBD_MAX_NUM_INTERFACES)
+ {
+ ret = (USBD_StatusTypeDef)pdev->pClass->Setup (pdev, req);
+
+ if ((req->wLength == 0U) && (ret == USBD_OK))
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_StdEPReq
+* Handle standard usb endpoint requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+USBD_StatusTypeDef USBD_StdEPReq (USBD_HandleTypeDef *pdev , USBD_SetupReqTypedef *req)
+{
+
+ uint8_t ep_addr;
+ USBD_StatusTypeDef ret = USBD_OK;
+ USBD_EndpointTypeDef *pep;
+ ep_addr = LOBYTE(req->wIndex);
+
+ switch (req->bmRequest & USB_REQ_TYPE_MASK)
+ {
+
+ case USB_REQ_TYPE_CLASS:
+ case USB_REQ_TYPE_VENDOR:
+ pdev->pClass->Setup (pdev, req);
+ break;
+
+ case USB_REQ_TYPE_STANDARD:
+ /* Check if it is a class request */
+ if ((req->bmRequest & 0x60U) == 0x20U)
+ {
+ ret = (USBD_StatusTypeDef)pdev->pClass->Setup (pdev, req);
+
+ return ret;
+ }
+
+ switch (req->bRequest)
+ {
+
+ case USB_REQ_SET_FEATURE :
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00U) && (ep_addr != 0x80U))
+ {
+ USBD_LL_StallEP(pdev, ep_addr);
+ USBD_LL_StallEP(pdev, 0x80U);
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr != 0x00U) && (ep_addr != 0x80U) && (req->wLength == 0x00U))
+ {
+ USBD_LL_StallEP(pdev, ep_addr);
+ }
+ }
+ USBD_CtlSendStatus(pdev);
+
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ break;
+
+ case USB_REQ_CLEAR_FEATURE :
+
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00U) && (ep_addr != 0x80U))
+ {
+ USBD_LL_StallEP(pdev, ep_addr);
+ USBD_LL_StallEP(pdev, 0x80U);
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_EP_HALT)
+ {
+ if ((ep_addr & 0x7FU) != 0x00U)
+ {
+ USBD_LL_ClearStallEP(pdev, ep_addr);
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ break;
+
+ case USB_REQ_GET_STATUS:
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if ((ep_addr != 0x00U) && (ep_addr != 0x80U))
+ {
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU]:\
+ &pdev->ep_out[ep_addr & 0x7FU];
+
+ pep->status = 0x0000U;
+
+ USBD_CtlSendData (pdev, (uint8_t *)(void *)&pep->status, 2U);
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if((ep_addr & 0x80U) == 0x80U)
+ {
+ if (pdev->ep_in[ep_addr & 0xFU].is_used == 0U)
+ {
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ }
+ else
+ {
+ if (pdev->ep_out[ep_addr & 0xFU].is_used == 0U)
+ {
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ }
+
+ pep = ((ep_addr & 0x80U) == 0x80U) ? &pdev->ep_in[ep_addr & 0x7FU]:\
+ &pdev->ep_out[ep_addr & 0x7FU];
+
+ if ((ep_addr == 0x00U) || (ep_addr == 0x80U))
+ {
+ pep->status = 0x0000U;
+ }
+ else if(USBD_LL_IsStallEP(pdev, ep_addr))
+ {
+ pep->status = 0x0001U;
+ }
+ else
+ {
+ pep->status = 0x0000U;
+ }
+
+ USBD_CtlSendData (pdev, (uint8_t *)(void *)&pep->status, 2U);
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ break;
+ }
+
+ return ret;
+}
+/**
+* @brief USBD_GetDescriptor
+* Handle Get Descriptor requests
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetDescriptor(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ uint16_t len;
+ uint8_t *pbuf;
+
+
+ switch (req->wValue >> 8)
+ {
+#if (USBD_LPM_ENABLED == 1U)
+ case USB_DESC_TYPE_BOS:
+ pbuf = pdev->pDesc->GetBOSDescriptor(pdev->dev_speed, &len);
+ break;
+#endif
+ case USB_DESC_TYPE_DEVICE:
+ pbuf = pdev->pDesc->GetDeviceDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USB_DESC_TYPE_CONFIGURATION:
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetHSConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ else
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetFSConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_CONFIGURATION;
+ }
+ break;
+
+ case USB_DESC_TYPE_STRING:
+ switch ((uint8_t)(req->wValue))
+ {
+ case USBD_IDX_LANGID_STR:
+ pbuf = pdev->pDesc->GetLangIDStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_MFC_STR:
+ pbuf = pdev->pDesc->GetManufacturerStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_PRODUCT_STR:
+ pbuf = pdev->pDesc->GetProductStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_SERIAL_STR:
+ pbuf = pdev->pDesc->GetSerialStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_CONFIG_STR:
+ pbuf = pdev->pDesc->GetConfigurationStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ case USBD_IDX_INTERFACE_STR:
+ pbuf = pdev->pDesc->GetInterfaceStrDescriptor(pdev->dev_speed, &len);
+ break;
+
+ default:
+#if (USBD_SUPPORT_USER_STRING == 1U)
+ pbuf = pdev->pClass->GetUsrStrDescriptor(pdev, (req->wValue) , &len);
+ break;
+#else
+ USBD_CtlError(pdev , req);
+ return;
+#endif
+ }
+ break;
+ case USB_DESC_TYPE_DEVICE_QUALIFIER:
+
+ if(pdev->dev_speed == USBD_SPEED_HIGH)
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetDeviceQualifierDescriptor(&len);
+ break;
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ case USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION:
+ if(pdev->dev_speed == USBD_SPEED_HIGH )
+ {
+ pbuf = (uint8_t *)pdev->pClass->GetOtherSpeedConfigDescriptor(&len);
+ pbuf[1] = USB_DESC_TYPE_OTHER_SPEED_CONFIGURATION;
+ break;
+ }
+ else
+ {
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ default:
+ USBD_CtlError(pdev , req);
+ return;
+ }
+
+ if((len != 0U) && (req->wLength != 0U))
+ {
+
+ len = MIN(len, req->wLength);
+
+ USBD_CtlSendData (pdev, pbuf, len);
+ }
+
+ if(req->wLength == 0U)
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+}
+
+/**
+* @brief USBD_SetAddress
+* Set device address
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetAddress(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ uint8_t dev_addr;
+
+ if ((req->wIndex == 0U) && (req->wLength == 0U) && (req->wValue < 128U))
+ {
+ dev_addr = (uint8_t)(req->wValue) & 0x7FU;
+
+ if (pdev->dev_state == USBD_STATE_CONFIGURED)
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ pdev->dev_address = dev_addr;
+ USBD_LL_SetUSBAddress(pdev, dev_addr);
+ USBD_CtlSendStatus(pdev);
+
+ if (dev_addr != 0U)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ }
+ else
+ {
+ pdev->dev_state = USBD_STATE_DEFAULT;
+ }
+ }
+ }
+ else
+ {
+ USBD_CtlError(pdev, req);
+ }
+}
+
+/**
+* @brief USBD_SetConfig
+* Handle Set device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req)
+{
+ static uint8_t cfgidx;
+
+ cfgidx = (uint8_t)(req->wValue);
+
+ if (cfgidx > USBD_MAX_NUM_CONFIGURATION)
+ {
+ USBD_CtlError(pdev, req);
+ }
+ else
+ {
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_ADDRESSED:
+ if (cfgidx)
+ {
+ pdev->dev_config = cfgidx;
+ pdev->dev_state = USBD_STATE_CONFIGURED;
+ if(USBD_SetClassConfig(pdev, cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev, req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ if (cfgidx == 0U)
+ {
+ pdev->dev_state = USBD_STATE_ADDRESSED;
+ pdev->dev_config = cfgidx;
+ USBD_ClrClassConfig(pdev, cfgidx);
+ USBD_CtlSendStatus(pdev);
+ }
+ else if (cfgidx != pdev->dev_config)
+ {
+ /* Clear old configuration */
+ USBD_ClrClassConfig(pdev, (uint8_t)pdev->dev_config);
+
+ /* set new configuration */
+ pdev->dev_config = cfgidx;
+ if(USBD_SetClassConfig(pdev, cfgidx) == USBD_FAIL)
+ {
+ USBD_CtlError(pdev, req);
+ return;
+ }
+ USBD_CtlSendStatus(pdev);
+ }
+ else
+ {
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default:
+ USBD_CtlError(pdev, req);
+ USBD_ClrClassConfig(pdev, cfgidx);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetConfig
+* Handle Get device configuration request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetConfig(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req)
+{
+ if (req->wLength != 1U)
+ {
+ USBD_CtlError(pdev , req);
+ }
+ else
+ {
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_DEFAULT:
+ case USBD_STATE_ADDRESSED:
+ pdev->dev_default_config = 0U;
+ USBD_CtlSendData (pdev, (uint8_t *)(void *)&pdev->dev_default_config, 1U);
+ break;
+
+ case USBD_STATE_CONFIGURED:
+ USBD_CtlSendData (pdev, (uint8_t *)(void *)&pdev->dev_config, 1U);
+ break;
+
+ default:
+ USBD_CtlError(pdev , req);
+ break;
+ }
+ }
+}
+
+/**
+* @brief USBD_GetStatus
+* Handle Get Status request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_GetStatus(USBD_HandleTypeDef *pdev, USBD_SetupReqTypedef *req)
+{
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_DEFAULT:
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+ if(req->wLength != 0x2U)
+ {
+ USBD_CtlError(pdev, req);
+ break;
+ }
+
+#if ( USBD_SELF_POWERED == 1U)
+ pdev->dev_config_status = USB_CONFIG_SELF_POWERED;
+#else
+ pdev->dev_config_status = 0U;
+#endif
+
+ if (pdev->dev_remote_wakeup)
+ {
+ pdev->dev_config_status |= USB_CONFIG_REMOTE_WAKEUP;
+ }
+
+ USBD_CtlSendData (pdev, (uint8_t *)(void *)&pdev->dev_config_status, 2U);
+ break;
+
+ default :
+ USBD_CtlError(pdev , req);
+ break;
+ }
+}
+
+
+/**
+* @brief USBD_SetFeature
+* Handle Set device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_SetFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 1U;
+ USBD_CtlSendStatus(pdev);
+ }
+
+}
+
+
+/**
+* @brief USBD_ClrFeature
+* Handle clear device feature request
+* @param pdev: device instance
+* @param req: usb request
+* @retval status
+*/
+static void USBD_ClrFeature(USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ switch (pdev->dev_state)
+ {
+ case USBD_STATE_DEFAULT:
+ case USBD_STATE_ADDRESSED:
+ case USBD_STATE_CONFIGURED:
+ if (req->wValue == USB_FEATURE_REMOTE_WAKEUP)
+ {
+ pdev->dev_remote_wakeup = 0U;
+ USBD_CtlSendStatus(pdev);
+ }
+ break;
+
+ default :
+ USBD_CtlError(pdev , req);
+ break;
+ }
+}
+
+/**
+* @brief USBD_ParseSetupRequest
+* Copy buffer into setup structure
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_ParseSetupRequest(USBD_SetupReqTypedef *req, uint8_t *pdata)
+{
+ req->bmRequest = *(uint8_t *) (pdata);
+ req->bRequest = *(uint8_t *) (pdata + 1);
+ req->wValue = SWAPBYTE (pdata + 2);
+ req->wIndex = SWAPBYTE (pdata + 4);
+ req->wLength = SWAPBYTE (pdata + 6);
+
+}
+
+/**
+* @brief USBD_CtlError
+* Handle USB low level Error
+* @param pdev: device instance
+* @param req: usb request
+* @retval None
+*/
+
+void USBD_CtlError( USBD_HandleTypeDef *pdev ,
+ USBD_SetupReqTypedef *req)
+{
+ USBD_LL_StallEP(pdev , 0x80U);
+ USBD_LL_StallEP(pdev , 0U);
+}
+
+
+/**
+ * @brief USBD_GetString
+ * Convert Ascii string into unicode one
+ * @param desc : descriptor buffer
+ * @param unicode : Formatted string buffer (unicode)
+ * @param len : descriptor length
+ * @retval None
+ */
+void USBD_GetString(uint8_t *desc, uint8_t *unicode, uint16_t *len)
+{
+ uint8_t idx = 0U;
+
+ if (desc != NULL)
+ {
+ *len = (uint16_t)USBD_GetLen(desc) * 2U + 2U;
+ unicode[idx++] = *(uint8_t *)(void *)len;
+ unicode[idx++] = USB_DESC_TYPE_STRING;
+
+ while (*desc != '\0')
+ {
+ unicode[idx++] = *desc++;
+ unicode[idx++] = 0U;
+ }
+ }
+}
+
+/**
+ * @brief USBD_GetLen
+ * return the string length
+ * @param buf : pointer to the ascii string buffer
+ * @retval string length
+ */
+static uint8_t USBD_GetLen(uint8_t *buf)
+{
+ uint8_t len = 0U;
+
+ while (*buf != '\0')
+ {
+ len++;
+ buf++;
+ }
+
+ return len;
+}
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Core/Src/usbd_desc_template.c b/Core/Src/usbd_desc_template.c
new file mode 100644
index 0000000..5b9841a
--- /dev/null
+++ b/Core/Src/usbd_desc_template.c
@@ -0,0 +1,274 @@
+/**
+ ******************************************************************************
+ * @file usbd_desc_template.c
+ * @author MCD Application Team
+ * @brief This file provides the USBD descriptors and string formatting method.
+ * This template should be copied to the user folder, renamed and customized
+ * following user needs.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * http://www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_core.h"
+#include "usbd_desc.h"
+#include "usbd_conf.h"
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+#define USBD_VID 0x0483
+#define USBD_PID 0xaaaa /* Replace '0xaaaa' with your device product ID */
+#define USBD_LANGID_STRING 0xbbb /* Replace '0xbbb' with your device language ID */
+#define USBD_MANUFACTURER_STRING "xxxxx" /* Add your manufacturer string */
+#define USBD_PRODUCT_HS_STRING "xxxxx" /* Add your product High Speed string */
+#define USBD_PRODUCT_FS_STRING "xxxxx" /* Add your product Full Speed string */
+#define USBD_CONFIGURATION_HS_STRING "xxxxx" /* Add your configuration High Speed string */
+#define USBD_INTERFACE_HS_STRING "xxxxx" /* Add your Interface High Speed string */
+#define USBD_CONFIGURATION_FS_STRING "xxxxx" /* Add your configuration Full Speed string */
+#define USBD_INTERFACE_FS_STRING "xxxxx" /* Add your Interface Full Speed string */
+
+/* Private macro -------------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+uint8_t *USBD_Class_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t *USBD_Class_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t *USBD_Class_ManufacturerStrDescriptor (USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t *USBD_Class_ProductStrDescriptor (USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t *USBD_Class_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t *USBD_Class_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+uint8_t *USBD_Class_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length);
+#ifdef USB_SUPPORT_USER_STRING_DESC
+uint8_t *USBD_Class_USRStringDesc (USBD_SpeedTypeDef speed, uint8_t idx, uint16_t *length);
+#endif /* USB_SUPPORT_USER_STRING_DESC */
+
+/* Private variables ---------------------------------------------------------*/
+USBD_DescriptorsTypeDef Class_Desc = {
+ USBD_Class_DeviceDescriptor,
+ USBD_Class_LangIDStrDescriptor,
+ USBD_Class_ManufacturerStrDescriptor,
+ USBD_Class_ProductStrDescriptor,
+ USBD_Class_SerialStrDescriptor,
+ USBD_Class_ConfigStrDescriptor,
+ USBD_Class_InterfaceStrDescriptor,
+};
+
+/* USB Standard Device Descriptor */
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN uint8_t USBD_DeviceDesc[USB_LEN_DEV_DESC] __ALIGN_END = {
+ 0x12, /* bLength */
+ USB_DESC_TYPE_DEVICE, /* bDescriptorType */
+ 0x00, /* bcdUSB */
+ 0x02,
+ 0x00, /* bDeviceClass */
+ 0x00, /* bDeviceSubClass */
+ 0x00, /* bDeviceProtocol */
+ USB_MAX_EP0_SIZE, /* bMaxPacketSize */
+ LOBYTE(USBD_VID), /* idVendor */
+ HIBYTE(USBD_VID), /* idVendor */
+ LOBYTE(USBD_PID), /* idVendor */
+ HIBYTE(USBD_PID), /* idVendor */
+ 0x00, /* bcdDevice rel. 2.00 */
+ 0x02,
+ USBD_IDX_MFC_STR, /* Index of manufacturer string */
+ USBD_IDX_PRODUCT_STR, /* Index of product string */
+ USBD_IDX_SERIAL_STR, /* Index of serial number string */
+ USBD_MAX_NUM_CONFIGURATION /* bNumConfigurations */
+}; /* USB_DeviceDescriptor */
+
+/* USB Standard Device Descriptor */
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN uint8_t USBD_LangIDDesc[USB_LEN_LANGID_STR_DESC] __ALIGN_END = {
+ USB_LEN_LANGID_STR_DESC,
+ USB_DESC_TYPE_STRING,
+ LOBYTE(USBD_LANGID_STRING),
+ HIBYTE(USBD_LANGID_STRING),
+};
+
+uint8_t USBD_StringSerial[USB_SIZ_STRING_SERIAL] =
+{
+ USB_SIZ_STRING_SERIAL,
+ USB_DESC_TYPE_STRING,
+};
+
+#if defined ( __ICCARM__ ) /*!< IAR Compiler */
+ #pragma data_alignment=4
+#endif
+__ALIGN_BEGIN uint8_t USBD_StrDesc[USBD_MAX_STR_DESC_SIZ] __ALIGN_END;
+
+/* Private functions ---------------------------------------------------------*/
+static void IntToUnicode (uint32_t value , uint8_t *pbuf , uint8_t len);
+static void Get_SerialNum(void);
+
+/**
+ * @brief Returns the device descriptor.
+ * @param speed: Current device speed
+ * @param length: Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t *USBD_Class_DeviceDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ *length = sizeof(USBD_DeviceDesc);
+ return (uint8_t*)USBD_DeviceDesc;
+}
+
+/**
+ * @brief Returns the LangID string descriptor.
+ * @param speed: Current device speed
+ * @param length: Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t *USBD_Class_LangIDStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ *length = sizeof(USBD_LangIDDesc);
+ return (uint8_t*)USBD_LangIDDesc;
+}
+
+/**
+ * @brief Returns the product string descriptor.
+ * @param speed: Current device speed
+ * @param length: Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t *USBD_Class_ProductStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == USBD_SPEED_HIGH)
+ {
+ USBD_GetString((uint8_t *)USBD_PRODUCT_HS_STRING, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_PRODUCT_FS_STRING, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Returns the manufacturer string descriptor.
+ * @param speed: Current device speed
+ * @param length: Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t *USBD_Class_ManufacturerStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ USBD_GetString((uint8_t *)USBD_MANUFACTURER_STRING, USBD_StrDesc, length);
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Returns the serial number string descriptor.
+ * @param speed: Current device speed
+ * @param length: Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t *USBD_Class_SerialStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ *length = USB_SIZ_STRING_SERIAL;
+
+ /* Update the serial number string descriptor with the data from the unique ID*/
+ Get_SerialNum();
+
+ return (uint8_t*)USBD_StringSerial;
+}
+
+/**
+ * @brief Returns the configuration string descriptor.
+ * @param speed: Current device speed
+ * @param length: Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t *USBD_Class_ConfigStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == USBD_SPEED_HIGH)
+ {
+ USBD_GetString((uint8_t *)USBD_CONFIGURATION_HS_STRING, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_CONFIGURATION_FS_STRING, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Returns the interface string descriptor.
+ * @param speed: Current device speed
+ * @param length: Pointer to data length variable
+ * @retval Pointer to descriptor buffer
+ */
+uint8_t *USBD_Class_InterfaceStrDescriptor(USBD_SpeedTypeDef speed, uint16_t *length)
+{
+ if(speed == USBD_SPEED_HIGH)
+ {
+ USBD_GetString((uint8_t *)USBD_INTERFACE_HS_STRING, USBD_StrDesc, length);
+ }
+ else
+ {
+ USBD_GetString((uint8_t *)USBD_INTERFACE_FS_STRING, USBD_StrDesc, length);
+ }
+ return USBD_StrDesc;
+}
+
+/**
+ * @brief Create the serial number string descriptor
+ * @param None
+ * @retval None
+ */
+static void Get_SerialNum(void)
+{
+ uint32_t deviceserial0, deviceserial1, deviceserial2;
+
+ deviceserial0 = *(uint32_t*)DEVICE_ID1;
+ deviceserial1 = *(uint32_t*)DEVICE_ID2;
+ deviceserial2 = *(uint32_t*)DEVICE_ID3;
+
+ deviceserial0 += deviceserial2;
+
+ if (deviceserial0 != 0)
+ {
+ IntToUnicode (deviceserial0, &USBD_StringSerial[2] ,8);
+ IntToUnicode (deviceserial1, &USBD_StringSerial[18] ,4);
+ }
+}
+
+/**
+ * @brief Convert Hex 32Bits value into char
+ * @param value: value to convert
+ * @param pbuf: pointer to the buffer
+ * @param len: buffer length
+ * @retval None
+ */
+static void IntToUnicode (uint32_t value , uint8_t *pbuf , uint8_t len)
+{
+ uint8_t idx = 0;
+
+ for( idx = 0 ; idx < len ; idx ++)
+ {
+ if( ((value >> 28)) < 0xA )
+ {
+ pbuf[ 2* idx] = (value >> 28) + '0';
+ }
+ else
+ {
+ pbuf[2* idx] = (value >> 28) + 'A' - 10;
+ }
+
+ value = value << 4;
+
+ pbuf[ 2* idx + 1] = 0;
+ }
+}
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Core/Src/usbd_ioreq.c b/Core/Src/usbd_ioreq.c
new file mode 100644
index 0000000..fabf66a
--- /dev/null
+++ b/Core/Src/usbd_ioreq.c
@@ -0,0 +1,216 @@
+/**
+ ******************************************************************************
+ * @file usbd_ioreq.c
+ * @author MCD Application Team
+ * @brief This file provides the IO requests APIs for control endpoints.
+ ******************************************************************************
+ * @attention
+ *
+ * © Copyright (c) 2015 STMicroelectronics.
+ * All rights reserved.
+ *
+ * This software component is licensed by ST under Ultimate Liberty license
+ * SLA0044, the "License"; You may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at:
+ * http://www.st.com/SLA0044
+ *
+ ******************************************************************************
+ */
+
+/* Includes ------------------------------------------------------------------*/
+#include "usbd_ioreq.h"
+
+/** @addtogroup STM32_USB_DEVICE_LIBRARY
+ * @{
+ */
+
+
+/** @defgroup USBD_IOREQ
+ * @brief control I/O requests module
+ * @{
+ */
+
+/** @defgroup USBD_IOREQ_Private_TypesDefinitions
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Macros
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_FunctionPrototypes
+ * @{
+ */
+/**
+ * @}
+ */
+
+
+/** @defgroup USBD_IOREQ_Private_Functions
+ * @{
+ */
+
+/**
+* @brief USBD_CtlSendData
+* send data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendData (USBD_HandleTypeDef *pdev, uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_IN;
+ pdev->ep_in[0].total_length = len;
+ pdev->ep_in[0].rem_length = len;
+
+ /* Start the transfer */
+ USBD_LL_Transmit (pdev, 0x00U, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueSendData
+* continue sending data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be sent
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueSendData (USBD_HandleTypeDef *pdev,
+ uint8_t *pbuf, uint16_t len)
+{
+ /* Start the next transfer */
+ USBD_LL_Transmit (pdev, 0x00U, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlPrepareRx
+* receive data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlPrepareRx (USBD_HandleTypeDef *pdev, uint8_t *pbuf,
+ uint16_t len)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_DATA_OUT;
+ pdev->ep_out[0].total_length = len;
+ pdev->ep_out[0].rem_length = len;
+
+ /* Start the transfer */
+ USBD_LL_PrepareReceive (pdev, 0U, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlContinueRx
+* continue receive data on the ctl pipe
+* @param pdev: device instance
+* @param buff: pointer to data buffer
+* @param len: length of data to be received
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlContinueRx (USBD_HandleTypeDef *pdev, uint8_t *pbuf,
+ uint16_t len)
+{
+ USBD_LL_PrepareReceive(pdev, 0U, pbuf, len);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlSendStatus
+* send zero lzngth packet on the ctl pipe
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlSendStatus (USBD_HandleTypeDef *pdev)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_IN;
+
+ /* Start the transfer */
+ USBD_LL_Transmit(pdev, 0x00U, NULL, 0U);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_CtlReceiveStatus
+* receive zero lzngth packet on the ctl pipe
+* @param pdev: device instance
+* @retval status
+*/
+USBD_StatusTypeDef USBD_CtlReceiveStatus (USBD_HandleTypeDef *pdev)
+{
+ /* Set EP0 State */
+ pdev->ep0_state = USBD_EP0_STATUS_OUT;
+
+ /* Start the transfer */
+ USBD_LL_PrepareReceive (pdev, 0U, NULL, 0U);
+
+ return USBD_OK;
+}
+
+/**
+* @brief USBD_GetRxCount
+* returns the received data length
+* @param pdev: device instance
+* @param ep_addr: endpoint address
+* @retval Rx Data blength
+*/
+uint32_t USBD_GetRxCount (USBD_HandleTypeDef *pdev, uint8_t ep_addr)
+{
+ return USBD_LL_GetRxDataSize(pdev, ep_addr);
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/License.md b/License.md
new file mode 100644
index 0000000..c2c31dd
--- /dev/null
+++ b/License.md
@@ -0,0 +1,3 @@
+# Copyright (c) 2015 STMicroelectronics.
+
+This software component is licensed by ST under Ultimate Liberty license SLA0044, the "License". You may not use this file except in compliance with this license. You may obtain a copy of the license [here](https://www.st.com/SLA0044).
diff --git a/README.md b/README.md
index 24dfe41..a92107c 100644
--- a/README.md
+++ b/README.md
@@ -1 +1,48 @@
-# stm32_mw_usb_device
\ No newline at end of file
+# Middleware USB Device MCU Component
+
+## Overview
+
+**STM32Cube** is an STMicroelectronics original initiative to ease the developers life by reducing efforts, time and cost.
+
+**STM32Cube** covers the overall STM32 products portfolio. It includes a comprehensive embedded software platform, delivered for each STM32 series.
+ * The CMSIS modules (core and device) corresponding to the ARM(tm) core implemented in this STM32 product.
+ * The STM32 HAL-LL drivers : an abstraction drivers layer, the API ensuring maximized portability across the STM32 portfolio.
+ * The BSP Drivers of each evaluation or demonstration board provided by this STM32 series.
+ * A consistent set of middlewares components such as RTOS, USB, FatFS, Graphics, STM32_TouchSensing_Library...
+ * A full set of software projects (basic examples, applications or demonstrations) for each board provided by this STM32 series.
+
+Two models of publication are proposed for the STM32Cube embedded software:
+ * The monolithic **MCU Package** : all STM32Cube software modules of one STM32 series are present (Drivers, Middlewares, Projects, Utilities) in the repo (usual name **STM32Cubexx**, xx corresponding to the STM32 series).
+ * The **MCU component** : progressively from November 2019, each STM32Cube software module being part of the STM32Cube MCU Package, will be delivered as an individual repo, allowing the user to select and get only the required software functions.
+
+## Description
+
+This **stm32_mw_usb_device** MCU component repository is one element **common to all** STM32Cube MCU embedded software packages, providing the **USB Device MCU Middleware** part.
+
+## License
+
+Copyright (c) 2015 STMicroelectronics.
+
+This software component is licensed by ST under Ultimate Liberty license SLA0044, the "License". You may not use this file except in compliance with this license. You may obtain a copy of the license [here](https://www.st.com/SLA0044).
+
+## Release note
+
+Details about the content of this release are available in the release note [here](https://htmlpreview.github.io/?https://github.com/STMicroelectronics/stm32_mw_usb_device/blob/master/Release_Notes.html).
+
+## Compatibility information
+
+This table shows the correspondence between the USB Device MW version and the corresponding HAL version of the targeted series. It is **crucial** that you use a consistent set of versions for the MW - HAL, as mentioned in this table.
+
+Note that:
+* in case a series does not support a particular tag, it is not mentioned in front of it.
+* in case a series supports a recent tag, it is not mentioned in front of older ones.
+
+USB Device | HAL |
+---------- | ---------- |
+Tag v2.5.1 | Tag v1.10.2 ([stm32l0xx_hal_driver](https://github.com/STMicroelectronics/stm32l0xx_hal_driver))
+
+## Troubleshooting
+
+If you have any issue with the **software content** of this repository, you can file an issue [here](https://github.com/STMicroelectronics/stm32_mw_usb_device/issues/new/choose).
+
+For any other question related to the product, the tools, the environment, you can submit a topic to the [ST Community](https://community.st.com/s/).
diff --git a/Release_Notes.html b/Release_Notes.html
new file mode 100644
index 0000000..d986789
--- /dev/null
+++ b/Release_Notes.html
@@ -0,0 +1,1350 @@
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
\ No newline at end of file
+
+
+
+
+
+
+
+
+
|
+
