Version 1.0
This commit is contained in:
Your Name
189
Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_adc_ex.c
Normal file
189
Drivers/STM32F0xx_HAL_Driver/Src/stm32f0xx_hal_adc_ex.c
Normal file
@@ -0,0 +1,189 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f0xx_hal_adc_ex.c
|
||||
* @author MCD Application Team
|
||||
* @brief This file provides firmware functions to manage the following
|
||||
* functionalities of the Analog to Digital Convertor (ADC)
|
||||
* peripheral:
|
||||
* + Peripheral Control functions
|
||||
* Other functions (generic functions) are available in file
|
||||
* "stm32f0xx_hal_adc.c".
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2016 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
@verbatim
|
||||
[..]
|
||||
(@) Sections "ADC peripheral features" and "How to use this driver" are
|
||||
available in file of generic functions "stm32l1xx_hal_adc.c".
|
||||
[..]
|
||||
@endverbatim
|
||||
*/
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
#include "stm32f0xx_hal.h"
|
||||
|
||||
/** @addtogroup STM32F0xx_HAL_Driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup ADCEx ADCEx
|
||||
* @brief ADC HAL module driver
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
|
||||
/* Private typedef -----------------------------------------------------------*/
|
||||
/* Private define ------------------------------------------------------------*/
|
||||
/** @defgroup ADCEx_Private_Constants ADCEx Private Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* Fixed timeout values for ADC calibration, enable settling time, disable */
|
||||
/* settling time. */
|
||||
/* Values defined to be higher than worst cases: low clock frequency, */
|
||||
/* maximum prescaler. */
|
||||
/* Ex of profile low frequency : Clock source at 0.1 MHz, ADC clock */
|
||||
/* prescaler 4. */
|
||||
/* Unit: ms */
|
||||
#define ADC_DISABLE_TIMEOUT 2
|
||||
#define ADC_CALIBRATION_TIMEOUT 2U
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* Private macros -------------------------------------------------------------*/
|
||||
/* Private variables ---------------------------------------------------------*/
|
||||
/* Private function prototypes -----------------------------------------------*/
|
||||
/* Private functions ---------------------------------------------------------*/
|
||||
|
||||
/** @defgroup ADCEx_Exported_Functions ADCEx Exported Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @defgroup ADCEx_Exported_Functions_Group1 Extended Initialization/de-initialization functions
|
||||
* @brief Extended Initialization and Configuration functions
|
||||
*
|
||||
@verbatim
|
||||
===============================================================================
|
||||
##### IO operation functions #####
|
||||
===============================================================================
|
||||
[..] This section provides functions allowing to:
|
||||
(+) Perform the ADC calibration.
|
||||
@endverbatim
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Perform an ADC automatic self-calibration
|
||||
* Calibration prerequisite: ADC must be disabled (execute this
|
||||
* function before HAL_ADC_Start() or after HAL_ADC_Stop() ).
|
||||
* @note Calibration factor can be read after calibration, using function
|
||||
* HAL_ADC_GetValue() (value on 7 bits: from DR[6;0]).
|
||||
* @param hadc ADC handle
|
||||
* @retval HAL status
|
||||
*/
|
||||
HAL_StatusTypeDef HAL_ADCEx_Calibration_Start(ADC_HandleTypeDef* hadc)
|
||||
{
|
||||
HAL_StatusTypeDef tmp_hal_status = HAL_OK;
|
||||
uint32_t tickstart = 0U;
|
||||
uint32_t backup_setting_adc_dma_transfer = 0; /* Note: Variable not declared as volatile because register read is already declared as volatile */
|
||||
|
||||
/* Check the parameters */
|
||||
assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
|
||||
|
||||
/* Process locked */
|
||||
__HAL_LOCK(hadc);
|
||||
|
||||
/* Calibration prerequisite: ADC must be disabled. */
|
||||
if (ADC_IS_ENABLE(hadc) == RESET)
|
||||
{
|
||||
/* Set ADC state */
|
||||
ADC_STATE_CLR_SET(hadc->State,
|
||||
HAL_ADC_STATE_REG_BUSY,
|
||||
HAL_ADC_STATE_BUSY_INTERNAL);
|
||||
|
||||
/* Disable ADC DMA transfer request during calibration */
|
||||
/* Note: Specificity of this STM32 series: Calibration factor is */
|
||||
/* available in data register and also transferred by DMA. */
|
||||
/* To not insert ADC calibration factor among ADC conversion data */
|
||||
/* in array variable, DMA transfer must be disabled during */
|
||||
/* calibration. */
|
||||
backup_setting_adc_dma_transfer = READ_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG);
|
||||
CLEAR_BIT(hadc->Instance->CFGR1, ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG);
|
||||
|
||||
/* Start ADC calibration */
|
||||
hadc->Instance->CR |= ADC_CR_ADCAL;
|
||||
|
||||
tickstart = HAL_GetTick();
|
||||
|
||||
/* Wait for calibration completion */
|
||||
while(HAL_IS_BIT_SET(hadc->Instance->CR, ADC_CR_ADCAL))
|
||||
{
|
||||
if((HAL_GetTick() - tickstart) > ADC_CALIBRATION_TIMEOUT)
|
||||
{
|
||||
/* New check to avoid false timeout detection in case of preemption */
|
||||
if(HAL_IS_BIT_SET(hadc->Instance->CR, ADC_CR_ADCAL))
|
||||
{
|
||||
/* Update ADC state machine to error */
|
||||
ADC_STATE_CLR_SET(hadc->State,
|
||||
HAL_ADC_STATE_BUSY_INTERNAL,
|
||||
HAL_ADC_STATE_ERROR_INTERNAL);
|
||||
|
||||
/* Process unlocked */
|
||||
__HAL_UNLOCK(hadc);
|
||||
|
||||
return HAL_ERROR;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
/* Restore ADC DMA transfer request after calibration */
|
||||
SET_BIT(hadc->Instance->CFGR1, backup_setting_adc_dma_transfer);
|
||||
|
||||
/* Set ADC state */
|
||||
ADC_STATE_CLR_SET(hadc->State,
|
||||
HAL_ADC_STATE_BUSY_INTERNAL,
|
||||
HAL_ADC_STATE_READY);
|
||||
}
|
||||
else
|
||||
{
|
||||
/* Update ADC state machine to error */
|
||||
SET_BIT(hadc->State, HAL_ADC_STATE_ERROR_CONFIG);
|
||||
|
||||
tmp_hal_status = HAL_ERROR;
|
||||
}
|
||||
|
||||
/* Process unlocked */
|
||||
__HAL_UNLOCK(hadc);
|
||||
|
||||
/* Return function status */
|
||||
return tmp_hal_status;
|
||||
}
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
Reference in New Issue
Block a user